• CW61100D Type of the products:CW61100D
    These lathes can perform to turn end-faces,cylindricl surfaces and internal holes of various parts as well as metric,inch,module and pitch threads.The top slides can be operated individually by power for cutting short taper surface. Long taper surface can be turned automatically through the compound movement combining longitudinal feed with the top slide feed,moreover,the machines may be used for drilling,boring and trepanning.
    They are characteristics of power,high spindle speed,high rigidity.The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloy tools.

Introduction
Parameters
These lathes can perform to turn end-faces,cylindricl surfaces and internal holes of various parts as well as metric,inch,module and pitch threads.The top slides can be operated individually by power for cutting short taper surface. Long taper surface can be turned automatically through the compound movement combining longitudinal feed with the top slide feed,moreover,the machines may be used for drilling,boring and trepanning.
They are characteristics of power,high spindle speed,high rigidity.The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloy tools.
SPECIFICATION Model
CW611OOD CW621OOD CW61125D CW62125D CW61140D CW62140D CW61160D CW62160D
Max.swing diameter over bed 1040mm 1290mm 1440mm 1640mm
Max.swing diameter over carriage 650mm 900mm 1030mm 1030mm
Max.swing diameter on gap 1500mm 1750mm 1900mm 2100mm
Width of bed 755mm
Max.length of workpiece 1000mm 1500mm 2000-12000mm
The top two largest bearing 6t
Spindle nose A15(1:30)
Sindle bore diameter 130mm
Taper of spindle bore Metric No.140#
Range of spindle speed 3.15-315r/min 21kinds 3.5-290r/min 12kinds
Spindle front bearing inner diameter 200mm
Longitudinal feeds range 0.1-12r/min 56 kinds
Transversal feeds range 0.05-6mm/r 56kinds
Rapid speed Z-axis 3740mm/min
X-axis 1870mm/min
upper toolpost 935mm/min
Metrec threads range 1-120mm 44kinds
Inch threads range 3/8-28 TPI 31kinds
Module threads range 0.5-60mm 45kinds
Pitch threads range 1-56TPI 25kinds
Taper of tailstock sleeve Morse NO.80
Diameter of tailstock sleeve 160mm
Travel of tailstock sleeve 300mm
Main motor power 22kW
Rapid motor power 1.5kW
Coolant pump power 0.125kW
Home  |  About Us  |  News  |  Products  |  Guestbook  |  Contact Us
Powered by PageAdmin CMS